top of page
shipco.jpg

TYPE SHM - STEEL  HORIZONTAL MAKE-UP 

This unit is used for pumping water temps up to 200 degrees F (Model D pump) and up to 210 degrees F (Model P low NPSH pump). A standard black steel 3/16th” thick receiver is ASME code constructed with dished heads and tanks can be ASME code stamped if needed.  Heavier thickness options are also available. Receivers come in 300 stainless for max corrosion resistance, and most receiver sizes can be epoxy or plasite-lined. Standard receiver sizes range from 77 gallons and up and customized receivers can be made for unique circumstances. An electrical solenoid make-up water valve with float switch control is standard and units are available in either simplex or duplex design, as well as in triplex and quadraplex if needed. Motors come in either 1750 RPM or 3500 RPM in single or three phase and come equipped with bronz0fitted Model D or Model Pumps which are fitted with mechanical seals rated up to 250 degrees F.  Special faces and higher temp seals are available upon request, and units can be vertically or horizontally mounted. Units can also be set up with bronze-fitted, multi-stage pumps for high pressure use along with tungsten carbide mechanical seals on multi-stage pumps rated to 300 degrees F.

​

​

VIEW DOCUMENTATION

Screenshot_31.png
005StackedDA_CSB1 (1).jpg

PRODUCTS REPRESENTED

shipco.jpg
img_10.jpg
camus_hydronics_ltd.png
black logo.jpg
img_7.jpg
img_9.jpg
CarverLogo.jpeg
logo.gif
bottom of page